17oz Sublimation Mason Jar Tumbler
Quench your customers’ thirst for high-quality, personalized products with these cool 17oz. Mason Jar stainless steel tumblers for sublimation. These blank tumblers white shiny coat provides a very unique look and shine that you and your customers will love. The tumblers are made of a durable, lightweight stainless steel that will keep your drinks hot (or cold!) for hours on end.
- Stainless steel sublimation skinny tumblers
- Capacity: 17 oz.
- Shiny white coating provides a bright look
- Includes metal twist lid and metal straw
- For use with a 3D Vacuum Heat Press Machine, or heat shrink bags in a convection oven.
Time: 150 - 165 Seconds
- Attach sublimation transfer paper with image printed in reverse to the tumbler with thermal tape
- Place tumbler in press at the press temperature, and close the element around the tumbler
- Press for the specified time above needed
- If the image begins to look blurry, or burnt brown by over-pressing, decrease pressing time by 15 - 30 seconds
- Once done, remove the tumbler from the press and remove the transfer paper immediately
- Allow the tumbler to cool completely before use
Time: 6 - 7 Minutes
(test in your oven for accurate time)
Attach reversed printed image to tumbler with thermal tape
Place tumbler in heat shrink bag or silicone wrap
Place in oven preheated to 400°F for approximately 6 - 7 minutes (test to determine best timing!)
Afterwards, remove heat shrink bag / silicone wrap and paper immediately
Allow the tumbler to cool completely before use