12oz Sublimation Sippy Oval Tumbler
Shipping calculated at checkout.
These 12oz. stainless steel Sublimation Sippy Tumblers feature a stainless steel inner tank to keep your kids juices cool and warm for hours. They're encased in a polymer outer wrap for rich, full color transfers and a durable, premium feel.
- Sublimation Sippy tumbler blanks
- Capacity: 12oz.
- Printable polymer outer wrap
- Stainless steel inner tank
- Can contain cold or hot juices
- Food grade material, BPA free
Note: Be sure to remove lid before sublimating!
3D Vacuum Heat Press
Press Temperature: 325°F
Time: 150 - 165 Seconds
- Attach sublimation transfer paper with image printed in reverse to the tumbler with thermal tape
- Place tumbler in press at the press temperature, and close the element around the tumbler
- Press for the specified time above needed
- If the image begins to look blurry, or burnt brown by over-pressing, decrease pressing time by 15 - 30 seconds
- Once done, remove the tumbler from the press and remove the transfer paper immediately
- Allow the tumbler to cool completely before use
Press Temperature: 395°F
Time: 6 - 7 Minutes
(test in your oven for accurate time)
Attach reversed printed image to tumbler with thermal tape
Put the tumbler in the silicone wrap or heat shrink bag
Place in oven preheated to 395°F for approximately 6 - 7 minutes (test to determine best timing!)
Afterwards, remove heat shrink bag / wrap and transfer immediately
Allow the tumbler to cool completely before use