20oz Sublimation Bullet Tumbler

Quench your customers’ thirst for high-quality, personalized products with these cool 20 oz. Bullet shaped stainless steel tumblers for sublimation. These bullet tumblers are white with a gold top and a shiny coating that provides a very unique look that you and your customers will love. The tumblers are made of a durable, lightweight stainless steel that will keep your drinks hot (or cold!) for hours on end.

Specifications:

• Stainless steel sublimation tumbler
• Capacity: 20 oz.
• For use with a 3D Vacuum Heat Press, or Heat Shrink Bag in a convection oven.
  

Note: Be sure to remove lid before sublimating!

3D Vacuum Heat Press 

Press Temperature: 325°F
Time: 150 - 165 Seconds 

• Attach sublimation transfer paper with image printed in reverse to the tumbler with thermal tape
• Place tumbler in press at the press temperature, and close the element around the tumbler
• Press for the specified time above needed
• If the image begins to look blurry, or burnt brown by over-pressing, decrease pressing time by 15 - 30 seconds
• Once done, remove the tumbler from the press and remove the transfer paper immediately
• Allow the tumbler to cool completely before use

Oven Settings

Temperature: 395°F
Time: 6 - 7 Minutes
(test in your oven for accurate time)

• Attach reversed printed image to tumbler with thermal tape
• Place tumbler in heat shrink bag or silicone wrap
• Place in oven preheated to 400°F for approximately 6 - 7 minutes (test to determine best timing!)
• Afterwards, remove heat shrink bag / silicone wrap and paper immediately
• Allow the tumbler to cool completely before use